MAGI
Engineering
TIA-222-H / I  ·  ASCE 7  ·  Licensed TX PE

Telecom structural packages,
delivered sign‑ready.

Magi Engineering is your structural department without the overhead. Mount analysis, tower analysis, rooftop and water tank assessments — prepared so thoroughly the responsible PE can review and sign without rewriting a line.

Request a quote → View scope schedule
1,000+
Projects completed
40+
US states
48h
Mount analysis
TX PE
Licensed · sign-ready
ELEVATION — 150-FT MONOPOLE DWG S-3.1 · NTS
WIND — ASCE 7 150'-0" AGL L1 · EL 145' L2 · EL 130' DRILLED PIER FDN TWR RATING 92.4% PASS
S-1 Services — Scope Schedule REV A · 2026

Seven scopes.
One discipline.

Full-spectrum telecom structural engineering — from a single mount analysis to a complete tower package. Every deliverable prepared by a licensed Texas PE per TIA-222-H and TIA-222-I. We do nothing else.

SCOPE 0148H TURNAROUND

Tower Mount Analysis

Structural analysis of antenna mounts on existing towers — verifying the mount assembly carries proposed antenna and equipment loads under all governing load combinations.

  • Sector, platform, T-arm, and custom mount configurations
  • Full load calcs — wind, ice, gravity, seismic
  • RISA-3D structural model with complete output
  • We adapt to your report format
RISA-3DTIA-222-HTIA-222-I
SCOPE 02

Tower Mount Modification

When a mount fails review, we engineer the fix — a complete modification package that brings the assembly back into compliance.

  • Failure mode identification — overstressed members & connections
  • Modification design — pipe upgrade, reinforcement, reconfiguration
  • Revised RISA-3D model + AutoCAD modification drawings
  • Complete report — calculations and drawings
RISA-3DAutoCADTIA-222-H/I
SCOPE 03

Tower Structural Analysis

Full analysis of the tower itself — monopole, self-support lattice, and guyed configurations — with foundation reactions and connection checks included.

  • Monopole, SST, and guyed tower analysis
  • Foundation reactions — axial, shear, moment, torque
  • Multi-wind-speed and ice load cases where applicable
  • Full TnxTower model and tower rating output
TnxTowerTIA-222-H/IASCE 7Foundation
SCOPE 04

Rooftop Mount Analysis

Analysis of antenna mounts on rooftop structures — from pipe mounts on parapet walls to ballasted sleds — with connection checks to the building.

  • Pipe, sector, and facade mounts
  • Roof sleds — ballasted and anchored
  • Mount-to-building connection checks
  • RISA-3D model + Mathcad hand calcs where required
RISA-3DMathcadTIA-222-H/I
SCOPE 05

Rooftop Structural Analysis

Assessment of existing building elements under new telecom loads — beams, columns, slabs, and penthouses. Pairs with rooftop mount analysis for a complete package.

  • Beam, column, slab, and connection capacity checks
  • RISA-3D finite element models for complex structures
  • Tedds and Enercalc for standard element checks
  • Structural assessment letter available
RISA-3DEnercalcAISC 360ACI 318
SCOPE 06

Water Tank Mount Analysis

Analysis of antenna mounts on elevated water tanks — tripod, handrail, and corral systems, with tank-level load comparison where required.

  • Tripod mounts on tank roof or shell
  • Handrail and corral mount systems
  • Tank load comparison vs. existing capacity
  • Structural evaluation letter available
RISA-3DTIA-222-H/IEval. Letter
SCOPE 07

Equipment Platform Analysis

Ground-level and rooftop equipment platforms — new platform design, cabinet additions, and cabinet swap assessments with full RISA-3D modeling.

  • Cabinet addition and swap scenarios
  • New platform design or existing assessment
  • Connection and anchorage checks
  • RISA-3D model with full structural output
RISA-3DAutoCADAISC 360ASCE 7
// NOT SURE WHAT YOU NEED?

Send it for a free scope review.

Tower files, photos, an old report, or just a location and carrier request — we'll tell you exactly what scope is required and how long it takes. No obligation.

Request scope review →
S-2 Process — Submittal to Delivery REV A · 2026

No onboarding. No account managers.

You send the project, we deliver the package. Most clients are submitting their second project before they've finished setting up a vendor profile elsewhere.

01

Submit your project

Send tower files, site data, and loading requirements by email or your preferred channel. We confirm receipt and quote a delivery timeline the same day.

Email · Shared drive · Your system
02

We run the analysis

The licensed PE works the project directly in TnxTower, RISA-3D, or AutoCAD — whichever the work requires. You can reach the engineer throughout. No black box.

TnxTower · RISA-3D · AutoCAD
03

Receive a sign-ready package

Calculations, drawings, and report prepared to the standard where the responsible PE can review and sign without revision. Revisions on our end included until it's right.

First-submission quality · Revisions included
S-3 Engineer of Record — Qualifications REV A · 2026
Mehmet Ali Zeytun, P.E.
Licensed Professional Engineer seal — State of Texas
Mehmet Ali Zeytun, P.E.
Principal Engineer · Civil / Structural
License● P.E. — Texas, Active
EducationB.S. Civil + M.S., METU Ankara
Experience8+ years US telecom structural
BaseIstanbul — serving US remotely
HoursAvailable during US business hours

A real engineer.
Not a staffing layer.

Every project that leaves Magi Engineering goes through one licensed PE — not a rotating bench of junior staff. You work directly with the engineer doing the analysis. That means faster answers, fewer errors, and a report that reflects real engineering judgment.

With 8+ years of telecom structural experience and over 1,000 completed projects across 40+ US states, the work is deeply familiar: monopoles, self-support towers, guyed towers, rooftops, water tanks, and equipment platforms — across carriers, tower owners, and consulting firms.

Previously Structural Engineer & QA/QC Manager at Tower Engineering Professionals (TEP), one of the largest telecom structural firms in the US — preparing complete packages the responsible PE could sign without revision, and managing quality control across multi-market pipelines.

The result: senior-level structural capacity, overseas economics, and a track record your clients can verify.

// Software & standards
TnxTowerRISA-3DAutoCADPLS-CADDSAP2000MathcadTIA-222-H/IASCE 7AISC 360ACI 318IBC
S-4 Basis of Engagement — Why Firms Outsource to Us REV A · 2026

The case for an overseas
engineering partner.

US telecom firms use overseas structural teams to move faster and protect margins. Here's why it works — and why it works with us specifically.

N-1

Senior work, fraction of the cost

PE-level output at well below US in-house or domestic outsource rates. No benefits, no overhead, no hiring risk. Pay per project or retain monthly.

N-2

Fast without compromise

Mount analyses in 48 hours. Structural analyses quoted per scope, with the timeline stated upfront. Built around your deployment deadlines.

N-3

US standards, sign-ready output

TIA-222-H/I, ASCE 7, IBC. The deliverable is indistinguishable from what a domestic firm produces — because the standards are identical and the preparer is a Texas PE.

N-4

Telecom only

No bridges, no buildings, no general civil. 100% of our experience is wireless infrastructure — we never ramp up on your domain, because it's our only domain.

N-5

Overflow capacity on demand

When your pipeline spikes, add projects without adding headcount. No hiring cycle, no onboarding. Your team stays focused; we absorb the surge.

N-6

Built for the long term

Most clients start with one project and evolve into sustained integration. We learn your formats, your clients, your systems — the relationship compounds.

S-5 Reference — Prior Engagement VERIFIABLE ON REQUEST
"His reports were well-organized, correctly scoped, and consistently submission-ready with minimal back-and-forth. Beyond the technical output, he demonstrated strong project management instincts — understood timelines, communicated clearly when additional information was needed, and delivered consistently."
Structural Engineering Department Manager
Tower Engineering Professionals (TEP) — US telecom structural firm
S-6 Confidentiality & Data Handling REV A · 2026

Your project files stay private.

How we handle your structural data, tower locations, and carrier information — in writing, before any file moves.

C-1 · BEFORE TRANSFER

NDA before any file moves

We execute a mutual NDA before you send a single file. Tower locations, carrier data, structural findings, and client identities are legally protected from the first exchange. Use our template or send yours — executed within 24 hours.

C-2 · AFTER DELIVERY

Files deleted on completion

Once your final deliverable is confirmed, all project files — input data, calculations, drawings, correspondence — are permanently deleted from our systems. We don't archive your structural data.

C-3 · DURING WORK

No third-party sharing, ever

Your data is never shared with subcontractors, data vendors, or any third party. All analysis is performed in-house by the licensed PE assigned to your account. No outsourcing of your outsourcing.

C-4 · PORTFOLIO

Anonymized references only

We may reference completed project types — never with coordinates, site IDs, or carrier identities. Prefer zero portfolio reference? We honor that in writing as part of your NDA.

Ready to send files? Start with the NDA.

Request our standard mutual NDA, or send us yours — reviewed and executed within 24 hours.

Request NDA →
S-7 Engagement Models REV A · 2026

Start with one project.
Scale when it works.

Submit a single scope or embed us as your extended engineering team. Either way: no overhead, no hiring risk, no ramp-up.

Project-Based

Submit individual projects, receive complete deliverable packages per project. Ideal for overflow capacity, variable workloads, or one-off scopes.

  • Competitive per-project pricing
  • 48h turnaround on mount analysis
  • Timeline quoted upfront for structural work
  • Rush delivery available
  • Revisions included
  • No retainer required

Dedicated Overseas Team

A sustained partnership — your dedicated PE works within your systems, learns your clients, and delivers at your pace. Overseas economics, in-house output.

  • Dedicated PE assigned to your account
  • Monthly retainer — predictable cost
  • Works in your tools, templates & processes
  • Available during US business hours
  • NDA and onboarding provided
  • Scales as your pipeline grows
S-8 Contact — Start a Project RESPONSE ≤ 24H

Send the project.
Get a scope, timeline & quote in 24 hours.

No intake form, no sales funnel. Email the engineer directly — attach tower files, photos, or an existing report, or just describe the site. You'll get a straight answer from the person who'll do the analysis.

Two ways to start.

Most projects begin with a single email. Whether you know the scope or want us to figure it out, the address below reaches the engineer directly.

// When you contact us
NDA executed before any file transfer
Files deleted upon project completion
No third-party subcontracting of your data
We sign your NDA, or provide ours
✉malizeytun@magiengineering.com inLinkedIn — company page
AI KNOW THE SCOPE

Request a quote

Opens a pre-filled email — fill in your company, scope, and site details, attach your files, and send. Scope confirmation, timeline, and quote back within 24 hours.

Compose email →
BNOT SURE YET

Free scope review

Send whatever you have — a location, a carrier request, photos, an old report. We'll tell you exactly what scope is required and how long it takes. No obligation.

Send for review →